You must be logged in to do that
You must be logged in to add a favorite.
Log-In or register.
×
(click to close)

Model No: 156TOW-EMER-01-ALU

PRO Emergency Tower with Blue Powdercoat Finish

Left
Any devices shown are not included.
A revolutionary Emergency Call Tower to help pedestrians contact emergency response teams. Integrate any intercom or cameras of your choice--let us know your devices and we'll perform the cutouts. Flashing light bricks (top), vertical LED light bars (4 sides), and bright blue coating to attract attention. Rust free aluminum construction strong enough to withstand category 4 hurricane force winds. Designed for installation by a single person. See also Fast Foundations. (Devices not included.)
MSRP Price

$6,999.99

Inventory Type:

Build to Order Stock vs Build to Order
Stock: Popular products that are kept on hand.
Build to Order: Fabrication begins as soon as we get your order.

Product ready to ship in approx.
16 to 20 days
Register or Log-In to purchase 156TOW-EMER-01-ALU

Product Attributes

Material Aluminum
Finish Polyester Powdercoat
Color Blue
Mounts to Pad
Shape Rectangle
Mount Height
Reach
Product Dimensions 103 x 15 x 6 inches
Box Dimensions 107 x 19 x 9 inches
Box Weight 77 lb
Country of Origin United States of America

Customize It

We can help you design a solution for your devices, free of charge, within 48 hours.

FAST
FREE
FLEXIBLE
QUALITY

Product Overview

WIRING & INSTALLATION INSTRUCTIONS

Lights:

The lighting functionality is pre-programmed with optional presets.

The top strobe lights (brick lights) are on all the time but strobe when activated.  The rate is adjustable on the circuit board.

 The vertical lighting (light strips) is off until the photocell senses dusk/dark and activates white ambient light.  Photocell sensitivity and intensity is adjustable on the circuit board.

 The vertical lighting also strobes red and blue (alternatively red and yellow) in unison with the brick lights when activated. Duration is adjustable (1 to 20 minutes) on the circuit board.

 If a different functionality is required we can custom program the controller with extra lead time and an additional cost.
 

Wiring:

The wiring into the tower should be performed by someone local that knows the codes.  Running conduit into the bottom of the tower and terminating with an outdoor receptacle box is probably the most straightforward. (And a CAT6 for the intercom, check out third-party manufacturer device/intercom requirements.) The lighting system is 12 VDC which is powered by a 60 W 120 VAC power supply.  It has a 3-prong plug that can be clipped off and hard wired.  

The tower draws approximately 50 W and the smaller wall station draws approximately 25 W.

See your third-party device/intercom manufacturer schematic for wiring instructions.  Can it be powered by the same 120 power receptacle or POE?  Does the device have a normally open relay to connect a two-wire lead for the tower/wall station lighting trigger? 

If you are also planning on integrating cameras then having the 120 VAC power available in the tower is a plus.
 

Concrete & Anchors:

The concrete should be designed by someone local that can ensure it follows code, but we recommend 32” deep and 32” diameter minimum. The small concrete anchor (Fast Foundation, pn 66TOW-EMER-02-304) is placed and leveled in wet concrete (along with conduit, etc.)  Allow a few days to cure, then the tower can be placed. 

The large ground anchor (Fast Foundation, pn 66TOW-EMER-01-304) is placed and leveled in an open hole (36" deep and 36" diameter) with packed ground and/or gravel (along with conduit, etc.)  Backfill the hole with packed dirt/gravel fill. The tower can be placed immediately. 

There is a generous hole in the bottom of the tower for conduits and such.

Bought Together

Everything you need to get your 156TOW-EMER-01-ALU installed.

66TOW-EMER-02-304

Concrete Anchor for PRO Emergency Tower

156TOW-EMER-02-ALU

18" PRO Tower Extension

156TOW-EMER-01-304

J Hook Camera Mount for Emergency Towers

Related Products

Similar products that may offer just what you're looking for.

66TOW-EMER-01-304

Ground Anchor for PRO Emergency Tower

156STA-EMER-01-ALU

PRO Emergency Wall Station with Blue Powdercoat Finish

stud anchor kit, pedestal mounting hardware, pedestal installation kit
STUD-ANCHOR-625

Stud-bolt Pedestal Mounting Kit - 5/8" Bolts

L-bolt kit, pedestal install kit, pedestal mounting hardware
L-BOLT-625

L-bolt Pedestal Mounting Kit - 5/8" Bolts

Product Reviews

This product has no reviews
Log-In or register to add a review.

News about 156TOW-EMER-01-ALU

There are no news stories about 156TOW-EMER-01-ALU specifically
All News Stories